Ingancin PSD CNC Gantry Moveable Drilling Machine
Siffar tsarin samfurin
1.Adopt Taiwan BT50 high-rigidity tsakiyar fesa sandal.
2. Wuraren sarrafawa huɗu, 12 sets na na'ura mai aiki da karfin ruwa atomatik clamps.Yana ba da damar daidaitawa da sauri da ƙara ƙarfi.
3. A worktable rungumi dabi'ar na'ura mai aiki da karfin ruwa matsa da T-slot.
Sigar Fasaha
| Sunan siga | Abu | PSD2016 | PSD2020 | Saukewa: PSD3016 | Saukewa: PSD4030 | |
| Girman kayan aiki | (mm) Kauri mai sarrafawa (mm) | 100 | ||||
| Tsawon × Nisa (mm) | 2000×1600 | 2000×2000 | 3000×1600 | 4000×300 0 | ||
| Sliding CNC ikon shugaban | Ramin maƙarƙashiya | BT50 | ||||
| Diamita na hakowa (mm) | φ50 (Na zaɓi φ63) | |||||
| Diamita na taɓawa (mm) | M30 | |||||
| Gudun juyi (rpm) | 30-3000 (madaidaicin juzu'i mara nauyi) | |||||
| Motar Spindle Power (KW) | 11/15/22 | |||||
| karfin juyi (n≤600r/min) | 190/240/360Nm | |||||
| Spindle surface zuwa worktablenisa (mm) | 230-630 | |||||
| Dogon motsi na gantry (X axis) | Matsakaicin bugun jini (mm) | 2000 | 2000 | 3000 | ||
| Matsakaicin saurin motsi (m/min) | 10 | |||||
| Motar Servo (KW) | 2×2 | 2×2 | 2×2 | 2.5×2 | ||
| motsi na shugaban wutar lantarki (Y axis) | Matsakaicin bugun jini (mm) | 1600 | 2000 | 1600 | 3000 | |
| Matsakaicin saurin motsi (m/min) | 10 | |||||
| Motar Servo (KW) | 2 | 2 | 2 | 2.5 | ||
| Motsin kai tsaye na wutar lantarki ( axis Z) | Matsakaicin bugun jini (mm) | 400 | ||||
| Matsakaicin saurin motsi (m/min) | 8 | |||||
| Motar Servo (KW) | 2 | 2 | 2 | ||
| Machining daidaito | Daidaitaccen matsayi (mm) | 0.05/1000 | |||
| Maimaita daidaiton matsayi (mm) | 0.03/1000 | ||||
| tsarin sanyaya | hanyar sanyaya | Ciki sanyaya + sanyaya waje | |||
| Matsin sanyaya na ciki (Mpa) | 1.5Mpa | ||||
| Ƙarfin wutar lantarki na ciki (KW) | 4KW | ||||
| Matsin sanyaya na waje (Mpa) | 0.3Mpa | ||||
| Ƙarfin motar famfo mai sanyaya na waje (KW) | 0.75 | ||||
| Tsarin cire guntu | Siffar mai jigilar guntu | lebur sarkar | |||
| Gudun isar da guntu (m/min) | 1 | ||||
| Chip conveyor ikon motsa jiki | 0.75kw | ||||
| Tsarin ruwa | Matsi (Mpa) | 6 | |||
| Ƙarfin tankin mai (L) | 100L | ||||
| Aikiyankirike | Kaurin matse (mm) | 15～100 | |||
| Adadin Silinda masu Matsala (pcs) | 12 | ||||
| Ƙarfin Ƙarfi (KN) | 7.5 | ||||
| hanyar sarrafawa | Ikon maɓalli (canjin ƙafa) | ||||
| tsarin kula da lantarki | CNC tsarin | KND K1000+ | |||
| Adadin gatura na CNC | 3+1 | ||||
| atomatik lubrication tsarin | Lubrication matsa lamba | 2MPa | |||
| Matsakaicin cika adadin | 0.1 ml | ||||
| Zagayen man shafawa | 6-10 min | ||||
| Girma | Tsawon × Nisa × Tsawo (m) | 4X2.7X2.5 | 4X3.2X2.5 | 5X2.7X2.5 | |
| Nauyi (T) | 7.5 | 8 | 8.5 | ||
Aikace-aikace
Wannan jeri na iya yin hakowa, niƙa haske da kunnawafaranti masu haɗawa, flanges, faranti anka, sassan takardar bututu, da faranti na musayar zafi a cikida yawafilayenkarfehasumiyai, tsarin ƙarfe, sinadarai na petrochemicals, ƙarfin iska, makamashin nukiliya, da tukunyar jirgi.
