Bakin karfe coils slitting inji line
BAYANIN KYAUTATA
Ciyarwar Trolley
Manufar: Don saita na'urar da aka saita akan drum maras tushe.
Tsarin: Motar ta ƙunshi tarkacen ɗagawa na ruwa da kuma abin hawa mai tafiya.
Rack nadi diamita 220mm, nannade da polyester manne, tare da tsagi a tsakiya
An ɗaga silinda mai da aka saukar da shi, kuma ginshiƙan jagora huɗu suna jagora.
Motar fasin ɗin motar tana tuka ta kuma tana tafiya tare da layin dogo.
Jirgin yana da kebul da sarkar kariyar bututun mai.
Uncoiler + Reel Support
Amfani: Warkewa ta atomatik da kwancewa ko sake amfani da coils.
Tsarin: Nau'in dunƙule guda ɗaya.
Reel nau'i ne mai nau'in lobe hudu, wanda aka fadada shi ta hanyar ruwa da kwangila.Faɗawa da ƙaddamarwa na jiki shineΦ470-520mm, kuma takalman roba tare da kauri na 50mm an ƙara zuwa 620mm.
Motar DC ce ke motsa na'urar ta cikin akwatin kaya, kuma motar tana haifar da tashin hankali mara nauyi, wanda girmansa yana daidaitawa.
Babban shaft na reel sanye take da na'urar bugu na malam buɗe ido, kuma an samar da birki na fakin.
Ana lulluɓe abin nadi da roba, motar tana motsa jujjuyawar, kuma silinda mai tana jujjuya don danna kan kayan.
Injin tsaga
Aikace-aikace: Yanke takardar a cikin filaye daban-daban na faɗin tsayi.
Tsarin: Nau'in slider don layin samar da tsaga.
Babban abin yanka shaft aka shigar a kan dagawa darjewa, da ƙananan abun yanka shaft aka kafaffen shigar a cikin firam, da kuma motor daidaita da nisa tsakanin babba da ƙananan abun yanka shafts (sa zoba na babba da ƙananan ruwan wukake) ta hanyar injin turbin. .
Motar DC, mai ragewa, akwatin rarraba kaya da haɗin gwiwa na duniya ne ke tafiyar da shingen yanke
Wurin yankan shine inji tare da fayafai masu yankewa da yawa da nau'ikan sararin samaniya tare da kauri daban-daban, kuma fayafai masu yankewa da fayafai suna matsawa ta hanyar goro.Taimakon shaft ɗin kayan aiki shine ɓangaren welded, gefe ɗaya yana motsawa kuma ɗayan yana gyarawa.Lokacin canza kayan aiki, goyan bayan motsi yana cirewa ta sandar dunƙule tare da layin jagorar tushe, kuma ana samun goyan bayan ƙwanƙolin kayan aiki akan tsayayyen tallafi.
Injin rarrabuwar kawuna don layin tsagewar karfe na coil
Manufar: Don raba sassan bayan tsagewa, don hana tarawa lokacin wucewa ta cikin mai tayar da hankali, da sauƙaƙe tarin.
Tsarin: Na'urorin rabuwa guda biyu, an shigar da ɗayan a ƙofar teburin tashin hankali, kuma an shigar da ɗayan a hanyar fita daga cikin rami.
Winder + goyon bayan reel
Manufar: Don mayar da tsiri da aka tsaga.
Tsarin: Ya ƙunshi reel, akwatin gear, farantin turawa, kayan da aka ware da kuma latsawa, tsarin watsawa da goyon bayan reel.
Reel ɗin ba shi da sumul, tare da muƙamuƙi, faɗaɗa na'ura mai aiki da karfin ruwa da raguwa.Nisan faɗaɗawa da ƙanƙancewa shineΦ491-508 (cikakken da'irar) mm.
An rufe akwatin gear, tare da tsarin rage matakan matakai biyu da aka sanya a ciki, kuma an shigar da reel a jikin akwatin ta hanyar babban shinge.
Motar DC + Pulley + akwatin gear ne ke motsa na'urar, kuma an sanya birki mai huhu akan mashin fitarwa na motar.
Ana tura farantin turawa da silinda mai don taimakawa wajen sauke kaya.
Juyawa na hydraulic na rarraba kayan abu da mai ƙarewa, don matsawa kayan wutsiya ko raba da matsayi na kayan bel, wanda ya dace da iska da tsaftacewa.
TECHNICAL PARAMETERS
| 1.Raw abu sigogi | |
| Kayan abu | ST37 (Q235) |
| Kaurin faranti | 1.0 ~ 4 mm |
| Kaddarorin kayan aiki | Ƙarfin ƙarfi σb≤470MPa Iyakar Haɓaka σs≤235MPa |
| Fadin allo | 400-1500mm |
| Diamita na ciki na nada | Φ508mm/Φ610mm |
| Naɗa diamita na waje | ≤Φ1800mm |
| Matsakaicin nauyin nada | 15000 kg |
| 2.Finished samfurin sigogi | |
| Tsalle diamita na ciki | Φ508mm/Φ610mm (da takalman roba) |
| Tsare diamita na waje | ≤Φ1800mm |
| Matsakaicin nauyin juyawa | 15000 kg |
| Nisa mafi ƙarancin tsiri | ≥90mm ku |
| Nisa daidaito | 0.15mm |
| Shear burr | 5% kauri farantin, |
| Tace madaidaiciya | 0.5mm/1000mm (na gaske nada, nisa> 100mm) |
| 3. Kayan aiki sigogi | |
| Yawan tsage-tsalle | 16 tube (kauri＜2.5mm)10 tube (kauri＜4mm) |
| Gudun tsagawa | max100m/min |
| Jimlar iko | Aku 380KW |
| Yankin layin samarwa | 27mx12m (tsawo x nisa) |
| 4.Energy matsakaici bukatun | |
| tushen wutan lantarki: | Ƙarfin wutar lantarki: uku-lokaci 380VJuyin wutar lantarki: ± 5% Juyawa juzu'i: 50HZ± 1% |
| Matse iska | Matsin iska: 0.4～0.6Mpa (bushe tushen iska)Samar da iska: 500L/min |
| Mai Ruwa: | N46 anti-wear mai ruwa. |
